Duolabs Cas Interface 3 Plus
The Cas 3 Plus consists of a device that also includes the functionalities of the Cas 2 Cas includes 2 addons. In addition to this innovation, but there is mention a few other functions: The Cas 3 Plus can emulate a right CI slot. This therefore means that a module is no longer stuck in the PC needs to program around it. Also, the Cas 3 Plus program to remove all known cards.

Basic Functions of Cas 3 Plus Interface:

• USB Full Speed Connection with 12 Mbit
• RS-232 Connector
• 20 Pin Connector for external Connections
• internal Clock Speed 48 Mhz
• no external Power Supply needed
• Full PCMCIA Support
• Full Support for future wireless Applications
• Cas Studio Software Support

Below now described the basic functions a little more detail:

• Magic Module
• Matrix Module
• Matrix Revolution Module
• Matrix Reloaded
• Matrix Reborn

and all based SIDSA Cams can be directly written on the PCMCIA port.
Thanks to the 48 Mhz module k can kill most modules around 4 times faster than described by Cas 2 Interface.

• Joker Cam
• Zeta CAM

and all modules are based on the Neotion Chipset:
These modules can be repaired.

T Rex Modules:

• All T Rex Modules directly via Cas 3 Plus are described.
• This is much safer than when writing a module to a receiver.
• Defective modules can also be repaired where is wrongly programmed the Flash memory.
• XCAM with Angel and Orion chipsets, standard and premium versions
• All XCAM modules directly via Cas 3 Plus are described.

Card programming:
You can program all cards on the market via USB: So it is no problem all PIC and AVR based cards quickly and reliably identified. Titanium also can / OPOS and Knotcards are described. Thanks to the great flexibility of Cas 3 Plus module can also be implemented in future maps. Also defective T Rex cards can be repaired. RS232 Phoenix Smart Mouse Emulation: It can be emulated without any problems with the RS-232, a smart mouse. Thanks to the flexible 48 MHz system clock, you can select the following frequencies: 3.58/3.68/4.00/6.00 Mhz. Dreambox 56XX and 7000 bootloader repair feature: Simple and easy to repair the boot loader of the Dreambox is now possible with the Cas 3 Plus.

Cam Explorer:
Each module in the Cas 3 Plus Interface are inserted and it is as if it had plugged into a receiver. You can browse through the menus, directly on the PC. Look at the pictures at the end.

SIM Card Editor:
You can use this tool to read your phone card (change contacts) and. You also need a USB cable and a RS232 cable.