CCcam Sharing Package 1 Month without Device (Selfinstallation) The Offer for this package is to test the CCcam one Month. the Software can and must be installed independently from the Customer. a Installation Guide can be requested via Email. The Customer must contact us for the Order via Email , the Port will be provided by Us. The Port is turned off automatically after 1 Month.

Duolabs Cas Interface 3 Plus The Cas 3 Plus consists of a device that also includes the functionalities of the Cas 2 Cas includes 2 addons. In addition to this innovation, but there is mention a few other functions: The Cas 3 Plus can emulate a right CI slot. This therefore means that a module is no longer stuck in the PC needs to program around it. Also, the Cas 3 Plus program to remove all known cards. Basic Functions of Cas 3 Plus Interface: USB Full Speed Connection with 12 Mbit RS-232 Connector 20 Pin Connector for external Connections internal Clock Speed 48 Mhz no external Power Supply needed Full PCMCIA Support Full Support for future wireless Applications Cas Studio Software Support Below now described the basic functions a little more detail: Magic Module Matrix Module Matrix Revolution Module Matrix Reloaded Matrix Reborn and all based SIDSA Cams can be directly written on the PCMCIA port. Thanks to the 48 Mhz module k can kill most modules around 4 times faster than described by Cas 2 Interface. Joker Cam Zeta CAM and all modules are based on the Neotion Chipset: These modules can be repaired. T Rex Modules: All T Rex Modules directly via Cas 3 Plus are described. This is much safer than when writing a module to a receiver. Defective modules can also be repaired where is wrongly programmed the Flash memory. XCAM with Angel and Orion chipsets, standard and premium versions All XCAM modules directly via Cas 3 Plus are described. Card programming: You can program all cards on the market via USB: So it is no problem all PIC and AVR based cards quickly and reliably identified. Titanium also can / OPOS and Knotcards are described. Thanks to the great flexibility of Cas 3 Plus module can also be implemented in future maps. Also defective T Rex cards can be repaired. RS232 Phoenix Smart Mouse Emulation: It can be emulated without any problems with the RS-232, a smart mouse. Thanks to the flexible 48 MHz system clock, you can select the following frequencies: 3.58/3.68/4.00/6.00 Mhz. Dreambox 56XX and 7000 bootloader repair feature: Simple and easy to repair the boot loader of the Dreambox is now possible with the Cas 3 Plus. Cam Explorer: Each module in the Cas 3 Plus Interface are inserted and it is as if it had plugged into a receiver. You can browse through the menus, directly on the PC. Look at the pictures at the end. SIM Card Editor: You can use this tool to read your phone card (change contacts) and. You also need a USB cable and a RS232 cable.

Dreambox DM 800 S HD PVR + CCcam Sharing Package 12 Months The Dreambox DM 800 S HD PVR is a Digital DVB-S2-Receiver for TV- and Radioprogramms. 300 Mhz Processor supports the Linux TV API 10/100 Mbit Ethernet Interface prepared to install a 2,5" SATA-Drive two USB-Ports for external Drives Via the existing Plugin System for the Tuner needs to be replaced (eg, DVB-T or DVB-C). eSATA-Port (only available with no internal drive) Now we offer this Package with Server Access for 12 Months. It is to the CCcam Sharing Package for 12 Months. This Package requires no additional Cards. The Server Access costs 199 € per Year and includes many Providers. Pay to Pay Movie Orders but not work for all Providers of this Package. The package can be extended to the end of his Term at a Cost of 189 € for one more Year or after the time of the shared port is automatically closed.

Dreambox DM 8000 S HD PVR + CCcam Sharing Package 12 Months Dreambox DM 8000 HD S Twin PVR ready HDTV Sat Receiver. The HD PVR Receiver by Dream Multimedia, with up to 4 Tuners! The Dreambox 8000 marks the Pinnacle in Satellite Receivers. Because it is not only a simple Receiver. The magic word is HDTV, high definition television. Not only can receive the DM 8000 HDTV, it can also record. However one should not forget that HD material requires a lot of memory. A large hard disk is therefore almost a must. If this is the key feature of the receiver, so there are also other things that one finds little or not at all elsewhere. This once again includes the exchangeable tuner (DVB-S, DVB-C, DVB-T) and then an Ethernet connection is about three USB ports, S-ATA ports for the latest generation of hard drives and burners. 10/100 Mbit Ethernet Interface 3 USB-Ports for external Drives Via the existing Plugin System for the Tuner needs to be replaced (DVB-S, DVB-T or DVB-C). SATA-Ports for the new Generation of Hard Drives Now we offer this Package with Server Access for 12 Months. It is to the CCcam Sharing Package for 12 Months. This Package requires no additional Cards. The Server Access costs 199 € per Year and includes many Providers. Pay to Pay Movie Orders but not work for all Providers of this Package. The package can be extended to the end of his Term at a Cost of 189 € for one more Year or after the time of the shared port is automatically closed.